Router Bit Sets for WoodRat (Buy a set and save 10 to 20% off individual prices)

17-140 - 4 Pc HSS Dovetail Set

• Width: 1/4", Cutting Length: 1/2"
• Width: 5/16", Cutting Length: 5/8"
• Width: 3/8", Cutting Length: 3/4"
• Width: 7/16", Cutting Length: 7/8"
  All have 8° (1-in-7) slope and
  1/2" shanks 1-3/4" long

Made in USA from Crucible CPM M4 tool steel for exceptional wear resistance and high impact toughness. Our maximum performance dovetail bits for natural wood.

A narrower neck and more elegant profile than TCT bits offer. They're easy to sharpen using a diamond hone.

17-145 - 5 Pc HSS Dovetail Set

• 8°, Width: 1/4", Cutting Length: 1/2"
• 8°, Width: 5/16", Cutting Length: 5/8"
• 8°, Width: 3/8", Cutting Length: 3/4"
• 8°, Width: 7/16", Cutting Length: 7/8"
• 10°, Width: 9/16", Cutting Length: 15/16"
  All have 1/2" shanks 1-3/4" long

Includes all the Crucible CPM M4 HSS bits in our 17-140 set plus it adds a 9/16" 10° bit for sliding dovetails.

Other sizes available as individual bits.

17-175 - 7 Pc Carbide Tipped Dovetail Bit Set

• 8°, Width: 3/8", Cutting Length: 1/2 "
• 8°, Width: 7/16 ", Cutting Length: 5/8 "
• 8°, Width: 1/2 ", Cutting Length: 13/16 "
• 8°, Width: 11/16", Cutting Length: 1"
• 8°, Width: 13/16", Cutting Length: 1-1/4"
• 10°, Width: 9/16 ", Cutting Length: 11/16 "
• 10°, Width: 13/16 ", Cutting Length: 1 "
  All have 1/2" shanks 2" long

Always use TCT dovetail bits when cutting man made material. Use the 10-degree bits for sliding dovetails.

Designed with extra long shanks for WoodRat use.
Sold only as a set.

17-130 - 3 Pc Solid Carbide Spiral Straight Bit Set

• Width: 1/4", Cutting Length: 1-1/4", 1/4" shank
• Width: 3/8", Cutting Length: 1-1/4", 1/2" shank
• Width: 1/2", Cutting Length: 2", 1/2" shank
  The 1/2" cutter is 4" long, others are 3" long

Made in USA from solid carbide these upcut spiral straight bits are best for cutting tenons, mortises and dovetail pins.

Spiral bits are in continuous contact with the wood. They cut clean and leave a superior finish. They can be used with both real wood and man made material. Upcut spirals are the right choice for mortising since they lift sawdust out of the cut.

For dovetail pins, use our Button Calculator to determine WoodRat button (center plate) setting.

17-150 - 4 Pc HSS Dovetail Set (Metric)

• 8°, Width: 6mm, Cutting Length: 12mm
• 8°, Width: 8mm, Cutting Length: 16mm
• 8°, Width: 12mm, Cutting Length: 24mm
• 9.5°, Width: 15mm, Cutting Length: 25mm
• 1/2" to 8mm reducing sleeve
  15mm bit has 1/2" shank, others have 8mm shanks
  Shanks approximately 1-5/8" long

Use the 15mm bit for sliding dovetails

Made by WoodRat for the WoodRat and LittleRat

17-120 - 3 Pc HSS Straight Bit Set (Metric)

• Width: 8mm, Cutting Length: 42mm, 8mm shank
• Width: 10mm, Cutting Length: 50mm, 1/2" shank
• Width: 1/2", Cutting Length: 50mm, 1/2" shank
• 1/2" to 8mm reducing sleeve

With the exception of dovetails, straight bits can be used to make almost every woodworking joint in the book.

Made by WoodRat for the WoodRat and LittleRat

17-160 - 4 Pc HSS Drawer-front Set (Metric)

The optimum balance of strength and form. These unique 6.5° (1-in-9) slope cutters allow you to closely match traditional needle pin half-blind dovetails. Newly redesigned.

• Width: 5.5mm, Cutting Length: 13.5mm (2 each)
• Width: 7mm, Cutting Length: 18mm (2 each)

Sold in pairs in recognition that these cutters can break.
Order 32-110 sleeve for use in 1/2" chucks.

Note: These cutters are make by WoodRat for use on the WoodRat WR5. They are not LittleRat compatible

17-200 - Carbide Tipped Vertical Panel Raiser Bit Set

Set contains 2 vertical panel raising bits with ogee and convex profiles and 1/2" shanks. Cutter diameter 1 1/2", Depth of cut (profile width) 1 5/8". Designed with a 2" extended shank length especially for WoodRat and LittleRat. Sold only as a set.

The vertical design of these bits makes them ideal for WoodRat. With WoodRat power feed you can "climb cut" raised panels for a smooth, breakout free finish and their usage is safer than on a router table.